Here’s An Opinion On:
Submitted by: John Schofield
Bay windows are the types of windows that protrude from the walls of the house, usually at a 45-degree slanting. Most of the manufacturers though usually make only bay windows at 30 to 45 degrees while bay windows at 60 degrees are rare finds.
There are different sizes of bay windows that are fit for different houses. However, standard sizes are three feet six inches to ten feet six inches in width and three feet to six inches in height.
The usual materials used for bay windows are wood, aluminium, and vinyl. Wood though is the most common material used in these types of windows for being inexpensive than other materials. However, there are also wood windows that are clad with aluminium and extruded with vinyl but the last two options are priced at a premium. Primed wood windows, though cheap, need some special window treatments, such as regular painting, scraping, and repainting to stop the windows from rotting. Vinyl widows are easy to clean but they also need frames for both inside and outside the windows. Clad windows are also low maintenance though more expensive than the other two.
Ideal glazing for bay windows would be to use argon gas placed between the panes to produce energy efficient windows. This is considerably much better than simply using two panes divided by an air space. To provide better insulation for homes in cold climates, triple glazing is recommended, raising the energy efficiency to 25% more so than any other normal insulates glazing.
These bay windows usually cost about $800 to $1,100 as you will need to pay an expert for a three feet height and six feet wide window clad in vinyl, slanting at 30 degrees. If you want a custom made bay window, be prepared to pay 20% more and wait for four to six weeks before the windows will be installed. With all these considerations, you need to make careful and measured decisions then.
Again, you can make your decisions concerning the installation of bay windows if you will review the following details once more.
Size. It would be much better to replace your old windows with ones that are of equal size or smaller, but not bigger. This would also be a much cheaper option them. Buying a much larger window would mean more tedious and expensive task that can cost you $300 to $500 more. However, a much larger window would give you a better view of the outside and more light.
Sash. Bay windows are not really set to have a definite sash. Others mostly favour to use the same sash used in other windows but you are basically free to choose the style that you want. Shorter bay windows are more appropriately matched with double-hung sash while taller ones are better off matched with casement windows.
Window support. Good windows are designed with steel cables as support, which are connected below the braced or to the overhead framing.
Eave above the window. With an eave on top of the window, this would make for your ideal bay window. Bay windows with 30 degrees slant should have twelve to fourteen inches deep of eave, 45-degree windows should have sixteen to twenty-two inches deep of eave, and 60-degree windows should have eighteen to twenty-four inches deep of eaves as well.
About the Author:
Bi fold doorsBi folding doors
Source:
isnare.com
Permanent Link:
isnare.com/?aid=683379&ca=Home+Management